> Ni Visa
> Ni Visa Runtime 5.0.3
Ni Visa Runtime 5.0.3
If you unplugged a VISA USB device and plugged it back in, NI-VISA could not access the device properly. Stop any VISA application on the RT system that might have enabled interrupts for such cards before attempting independent reboot of the RT system. PXI Support PXI Geographic Addressing Support Starting with NI-VISA 3.0, NI-VISA supports geographic addressing for PXI resources. Significantly optimized PCI interrupts and block moves. navigate here
An installation process is needed if it’s a software that causes the issue. This is fixed. NI-VISA 3.6 For TCP/IP SOCKET sessions, re-enabling the termination character between read operations would incorrectly flush the internal buffer. This is the first time I have struck anything like this while trying to perform a "Simple" install. see here
In MAX, if you changed the VISA Options and browsed to another item, your changes would sometimes be lost. This is a new feature. This is fixed. This has been fixed.
This is fixed. Bug ID 46F9LLWI. This will install the NI-VISA 5.0.3 run-time engine. Basically a 32 bit board than can do stabilize and maybe alt hold - I think - and not much else, since I am not able to tune it and test
This is fixed. Contact Us Legal | Privacy | © National Instruments. Your Feedback Rate this document Select a Rating 1 - Poor 2 3 4 5 - Excellent Answered Your Question? additional hints Bug ID 93267.
NI-VISA 4.2 The default installation directory has changed from "C:\VXIPNP" to "C:\Program Files\IVI Foundation\VISA". For a VI running on LabVIEW RT, calling VISA Close on an ENET-Serial resource would occasionally either hang or return an error. This has been fixed. NI Spy occasionally would incorrectly report an output jobID of 0 for viReadAsync or viWriteAsync, even though the operation completed successfully with a valid nonzero jobID.
Bug ID 93245. Bug ID 46D93RWI. Note: The uninstaller application does not notify you when rebooting is necessary. viPrintf and variants did not support the %@2 identifier when using short integer arrays nor the %@3 identifier when using any arrays.
This is fixed. http://opinfos.com/ni-visa/ni-visa-runtime-4-2.html For LabVIEW RT systems, the pxisys.ini file is automatically copied to the remote system's c:\ni-rt\system directory. For PXI/PCI INSTR resources, the PXI_IS_EXPRESS attribute may have not returned VI_TRUE on some PXI Express devices. Sorry you are having trouble and I'm not helping but please persevere - it will be worth it.
For USB RAW sessions, now interrupt-out endpoints may be used for viWrite. Before downloading, click here to review this information. If a PXI multifunction device did not have function 0 registered as an NI-VISA resource, viFindRsrc would not return any of the other functions of that device either, even if they his comment is here NI-VISA 5.0.3 should upgrade properly over NI-VISA 2.0.1 through 4.6.2.
For example, you can change the hostname or IP address. NI-VISA Hope that helps 0 Kudos Message 4 of 15 (2,049 Views) Reply 0 Kudos Re: Missing installer component NI-VISA Runtime [Edited] K.Werner Member 05-19-2011 06:58 AM - edited 05-19-2011 These are fixed.
viFindRsrc would crash when given long strings that use remote NI-VISA.
Calling viGetAttribute on VI_ATTR_INTF_INST_NAME on TCPIP resources with Internet Explorer 2 would crash. This is fixed. This has been fixed. It is now 128.
Copyright © 1999-2005 The Apache Software Foundation. Added the ability to configure IEEE 1588-2008 clocks on networks. A lot of you are struggling to figure this out. weblink The default path to the configuration file visaconf.ini has changed to "C:\Documents and Settings\All Users\Application Data\National Instruments\NIvisa" on Windows XP/2000 and to "C:\ProgramData\National Instruments\NIvisa" on Windows Vista.
However, NI-VISA does not configure the Agilent/HP hardware; you still must do that with the Agilent/HP I/O Config utility. I uninstalled Configurator and surprisingly it only took about 4 minutes, A LOT FASTER than anything that occurred so far. I tested it on my System with CVI 2010 and VISA 5.0.3, OS is Win 7 32bit. 0 Kudos Message 8 of 15 (2,000 Views) Reply 0 Kudos Re: Missing installer This product includes components that use Xerces.
WinMerge says that the file is identical to yours attached to the last post. PXI Resource Naming Starting with NI-VISA 3.0, NI-VISA includes a new PXI resource format based on the traditional bus number/device number/function number addressing scheme: PXI0::-[.]::INSTR For example, given a PXI device So I tried installing it again, this time it took a few minutes, maybe 5 to 10 minutes but in any case a lot faster. Little confusing, I suppose.
Identify your PXI chassis. This is fixed. Bug ID 177456. zip&can=2&q= MikeD10-30-2012, 06:06 PMI'm using Windows 7 64 and never had any trouble installing or uninstalling the configurator and lab view (currently using the latest beta but had similar experience with
You can install the VISA COM API only if you have Internet Explorer 4.01 or higher on your system. If you are using NI-VISA with the VisaNS .NET API, you may find that an existing project created with an older version of VisaNS now produces build errors that read error